NEC 42" Multisystem PlasmaSync Display Monitor

The PlasmaSync 42PD2 is the latest generation of NEC?s42" PD Series monitors, the only plasma monitors available today that aredesigned specifically to provide an ideal solution for digital signageapplications in public display environments. PD Series monitors are thin and canhang on a wall, but that isn?t the only reason they are the ideal solution fordigital signage. The PlasmaSync 42PD2 incorporates an innovative set of featuresand capabilities that enable it to successfully meet the challenges of publicdisplay application environments like no other plasma monitor. If you arelooking for a 42" plasma monitor to display information in public settings,choose the only one that was designed specifically for your application needs -the PlasmaSync 42PD2.

Key Features:

Create an 84" diagonal image with no external equipment

The PlasmaSync 42PD2 includes a built-in matrix display capability that allows you to configure a 2x2 video wall with no additional external equipment. This gives you the flexibility to create a bigger-than life image you can hang right on the wall, which is a big benefit when you want to upgrade large static signs to equally large dynamic digital signage. All you have to do is connect the monitors via signal loop-through and mount them using one of NEC's pre-configured quad mount options. Screen image configuration is simple with all sizing and centering controls readily available in the On-Screen user menu system. Compared to a bulky CRT monitor or rear-screen projection matrix display the 42PD2 is slim at only 4.4 inches and cost-effective because it requires no external control equipment - and all this functionality is built right in.

Thin bezel enables 2x2 matrix configuration

At slightly more than 1" thick, the front bezel of the 42PD2 is the thinnest of any plasma monitor and thin enough to enable a 2x2 matrix configuration with minimal interference tot he screen image.

Anti-glare screen improves readability

The 42PD2 includes an anti-glare screen filter that helps make images readable in the difficult ambient lighting conditions common to many public display environments - such as storefront windows and transportation terminals.

Automatic Operation simplifies your application

The 42PD2 has a built-in programmable timer that allows the monitor to operate automatically. Power on, power off, switch input sources or enable the AccuShield Phosphor Protection System without ever touching the monitor. This can alleviate the need to train your personnel in the operation of the 42PD2 when deploying large numbers of displays across distributed installation sites.

AccuShield? Phosphor Protection System

NEC's exclusive AccuShield Phosphor Protection System improves the monitor's suitability for continuous use environments by alleviating concerns about image retention and phophor burn.

Innovative cabinet design provides

The PD Series provides a"bay" inside the monitor's cabinet that can accommodate a small form-factor PC. Design and integrate your own application-specific PC solution or utilize an off-the-shelf 3rd party product designed specifically for the 42PD2.

Create a self-contained solution

Any PD Series monitor can become a self-contained public display solution with source and display in one thin, neat, wall-mountable package when it is combined with a PC like the MiTAC PlasmaSync Engine? or one of the other small form-factor PCs developed for NEC by one of our PlasmaSync Partners.

Comprehensive & flexible inputs

A complete array of inputs including RGB, Composite Video, S-Video and a DVI 29-pin digital input are included. Signal loop through is available on RGB, Composite and S-Video inputs.

Cable management presents a clean look

PD Series monitors provide a cable management system that allows you to conceal cables and inputs for a clean appearance in a wall or ceiling mount installations. This prevents the need to add a costly enclosure to achieve the desired aesthetics in your installation. Plus, terminal doors enclose a convenient storage pocket for the handheld remote control.

RS232 external control

Monitor functions can be operated remotely via RS232 communications protocol, so you can run all of your signage from one central network control location without ever visiting the installation sites. And the monitors will even tell you if they have a problem because they include a self-diagnostic function that communicates via the RS232 port.

Easy to handle

Built-in carrying handles make moving and installing the monitor safe and convenient.

Specifications:

Frequency:
H-sync (kHz) 15.5 - 68.7 auto, step scan
V-sync (Hz) 46 - 85 auto, step scan

Computer Signal Compatibility:
VGA 640 x 480 @ 60, 72, 75 Hz
SVGA 800 x 600 @ 56, 60, 72, and 75 Hz
Wide SVGA 848 x 480 @ 60 Hz
Macintosh 640 x 480

Viewing Angle:
160 degrees horizontal and vertical

Standard Video Compatibility:
NTSC, PAL, SECAM, 4.43 NTSC

Input Terminals:
RGB 1 (Analog) 15-pin mini-D-sub x 1
RGB 2 (Analog) 5 BNC (RGB/HV) with loopout
RGB 3 (Digital) DVI 24 pin x 1
Video 1 Composite BNC x 1 with loopout
Video 2 S-Video 4-pin DIN with loopout

External Control:
15-pin mini D-sub x 1 (RS-232C and Open/Short control)

Power:
100-120V 50/60 Hz

Power Consumption:
430W (typical)

Dimensions:
(WxHxD) 39.3 x 23.4 x 4.5 inches
(WxHxD) 998 x 595 x 114 mm

Weight:
72.6 lbs. (without stand)
33.0 kg (without stand)

User Controls:
Front Bezel: Power on/off input selection, OSM access
(control lock switch located on input panel)
Remote Control: Power on/off, Input source select, OSM control, Visual control,Wireless/Wired remote control.

OSM Function:
Picture adjustment / Fine picture/ Color temperature / White balance/ OSM /Source information / Picture Position 1, 2 / Raster control (H width, V height)/ Visual control (Contrast, Brightness, Gamma, Color, Tint, Sharpness) / Autopicture / Wide mode (Normal, Full, Zoom, Stadium) / Long-life mode 1, 2/External control / Multiple screens setting / Auto timer / Power ON mode / colorsystem / Power management (ON/OFF) / Gray level / ID number (ID number setting,1-256)

Regulations:
FCC Class A, UL 1950, CSA950

Environmental Operation:
Temperature 0 C to 40 C 32 F to 104 F
Humidity 20 to 80% (no condensation)
Altitude 0 to1900m 0 to 6230 feet

Storage:
-10 C to 50 C 14 F to 122 F
Humidity 10 to 90% (no condensation)
Altitude 0 to 3000 m 0to 9840 feet

Other features:
Multiple screen, Auto timer, Power management