15 Amp, 3300 watts 220 volt NEMA 6-15 Outlet

Tue, 1 Nov 2011 13:35:22 GMT

INPUT:

Voltage: 108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase

Two 36 inch power cords, 15 amperes each line, NEMA 5-15 plugs

OUTPUT VOLTAGE:

15 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.

Portable, easy to use

Silent

Outlets for US 220 volt straight blade

Plug the 220 power tap into two independent 110 volt outlets without ground fault interrupters in the circuits. Connect your 220 volt equipment.

Single Phase Input: 216 to 250 Volts AC (2 times input voltage)

Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)

OUTPUT POWER:

3300 watts continuous, 16,500 watts peak, typical at 220 volts.

OUTPUT CURRENT:

15 amps continuous

OUTPUT RECEPTACLE:

straight blade, duplex, NEMA 6-15R

POWER CONSUMPTION:

8 watts, plus equipment connected

SIZE:

Approximately 6-1/2 inches x 5 inches x 3 inches

WEIGHT:

2.7 pounds

ENVIRONMENT:

35 to 95 degrees F, 85% relative humidity, max., non-condensing. No explosive gases, dust or other materials. Always keep Dry and Away from water, oils or other liquids. Avoid excessive dust.

LIMITED WARRANTY:

One year warranty

American 110 Volts Step up to American 220 Volts Power Tap for USA-CANADA Use

15 Amp, 3300 watts 220 volt NEMA 6-15 Outlet