RAM- DDR 400 & above

512MB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

512MB 184-pin DDR SDRAM DIMM Module, 2.5V, 64Mx64, 400MHz (PC-3200), CL 3...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 512MByte and organized as 64Mx64 array using (16) 32Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

256MB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

256MB 184-pin DDR SDRAM DIMM Module, 2.5V, 32Mx64, 400MHz (PC-3200), CL 3...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 256MByte and organized as 32Mx64 array using (8) 32Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

1GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB Kit (2x512MB) 184-pin DDR SDRAM DIMM Module, 2.5V, 64Mx64, 400MHz (PC-3200), CL 3...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 512MByte and organized as 64Mx64 array using (16) 32Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

512MB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

512MB Kit (2x256MB) 184-pin DDR SDRAM DIMM Module, 2.5V, 32Mx64, 400MHz (PC-3200), CL 3...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 256MByte and organized as 32Mx64 array using (8) 32Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

1GB 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

1GB 184-pin DDR SDRAM DIMM Module, 2.5V, 128Mx64, 400MHz (PC-3200), CL 3...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 1GByte and organized as 128Mx64 array using (16) 64Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

512MB 400MHz DDR CL2.5

Tue, 1 Nov 2011 13:37:03 GMT

512MB 184-pin DDR SDRAM DIMM Module, 2.5V, 64Mx64, 400MHz (PC-3200), CL 2.5...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 512MByte and organized as 64Mx64 array using (8) 32Mx16 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

256MB 400MHz DDR CL2.5

Tue, 1 Nov 2011 13:37:03 GMT

256MB 184-pin DDR SDRAM DIMM Module, 2.5V, 32Mx64, 400MHz (PC-3200), CL 2.5...This module is JEDEC Pinout compatible. A 256 byte serial EEPROM on board can be used to store module information such as timing, configuration, density, etc. This memory module is 256MByte and organized as 32Mx64 array using (8) 32Mx8 DDR SDRAMs in TSSOP II packages. All memory modules are fabricated using the latest technology design, six-layer printed circuit board substrate construction with low ESR decoupling capacitors on-board for high reliability and low noise....

1GB 400MHz DDR DIMM

Tue, 1 Nov 2011 13:37:03 GMT

iRAM 1GB DDR 400MHz DIMM...

512MB 400MHz DDR DIMM

Tue, 1 Nov 2011 13:37:03 GMT

iRAM 512MB DDR 400MHz DIMM...

1GB 400MHz DDR PC3200 UB

Tue, 1 Nov 2011 13:37:03 GMT

TechWorks by Buffalo 1GB DDR DIMM PC3200 (400MHz) Unbuffered x64 Non-ECC, 184-pin Memory Module, Chip Count 16, Type x8, 2 Bank, CAS Latency 3, 2.5V....

2GB Kit 400MHz DDR PC3200

Tue, 1 Nov 2011 13:37:03 GMT

Buffalo Select 2GB Kit (1GB x 2) DDR DIMM PC3200 (400MHz) Unbuffered x64 Non-ECC, 184-Pin Memory Module, Type x8, 4 Bank, CAS Latency 3, 2.6V....

512MB PC3200 (400Mhz) DDR DIMM

Tue, 1 Nov 2011 13:37:03 GMT

512MB PC3200 (400Mhz) DDR DIMM...

2GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

2GB Value Select series PC-3200 (400MHz) 184-pin DIMM, Unbuffered, CL 3-3-3-8...

1GB Kit 400MHz 2.5-3-3-8

Tue, 1 Nov 2011 13:37:03 GMT

1GB Kit (512MB x 2) Value Select series PC-3200 (400MHz) 184-pin DIMM, Unbuffered, CL 2.5-3-3-8...

2GB Kit 400MHz TWIN X Dual DDR

Tue, 1 Nov 2011 13:37:03 GMT

2GB Kit (1GB x 2) Twin XMS (Xtreme Memory Speed) series PC-3200 (400MHz) 184-pin DIMM, 2-3-3-6 Latency, 2.75V, Non-ECC, Unbuffered, Silver Heat Spreader...The TWINX2048-3200C2 is a pair of 1024 MByte DDR SDRAM DIMMs designed for extreme speed. TWINX matched memory pairs are specifically designed for motherboards using chipsets with dual memory channels. This part delivers outstanding performance at high clock speeds. It has been tested extensively in a variety of motherboards commonly used in gaming rigs. This memory has been verified to operate at 200 MHz (DDR400) at aggressive latencies of 2-3-3-6....

1GB 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

1GB Value Select series PC-3200 (400MHz) 184-pin DIMM, Unbuffered, CL 3-3-3-8...

1GB 400MHz 3-3-3-8 184pin

Tue, 1 Nov 2011 13:37:03 GMT

DDR, PC3200 128M x 64 non-ECC 184 DIMM, Unbuffered, CL3, 64Mx8 DRAMs. Operates at speeds of up to 400MHz. Retail....

1GB 400MHz DDR PC-3200

Tue, 1 Nov 2011 13:37:03 GMT

1GB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 128Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

1GB 400MHz DDR REG ECC

Tue, 1 Nov 2011 13:37:03 GMT

1GB DDR PC3200 (400MHz) Memory Module, CL=3, Registered, ECC, 2.6V, 128Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

1GB 400MHz ECC

Tue, 1 Nov 2011 13:37:03 GMT

1GB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, ECC, 2.6V, 128Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

256MB 400MHz Non-ECC DDR

Tue, 1 Nov 2011 13:37:03 GMT

256MB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 32Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

512MB 400MHz Non-ECC DDR

Tue, 1 Nov 2011 13:37:03 GMT

512MB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 64Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

512MB 400MHz DDR ECC

Tue, 1 Nov 2011 13:37:03 GMT

512MB DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, ECC, 2.6V, 64Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

2GB Kit 400MHz DDR REG ECC

Tue, 1 Nov 2011 13:37:03 GMT

2GB Kit (1GB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Registered, ECC, 2.6V, 128Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

2GB Kit 400MHz DDR ECC

Tue, 1 Nov 2011 13:37:03 GMT

2GB Kit (1GB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, ECC, 2.6V, 128Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

2GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

2GB Kit (1GB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 128Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

512MB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

512MB Kit (256MB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 32Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

1GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB Kit (512MB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Unbuffered, Non-ECC, 2.6V, 64Meg x 64, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

4GB 400MHz ECC Reg Kit PC3200

Tue, 1 Nov 2011 13:37:03 GMT

4GB Kit (2GB x 2) DDR PC3200 (400MHz) Memory Module, CL=3, Registered, ECC, 2.6V, 256Meg x 72, 184-pin DIMM. A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other. 184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.) The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins....

1GB DDR 400 UDIMM TAA COMP 184

Tue, 1 Nov 2011 13:37:03 GMT

1GB DDR 400(PC3200) UDIMM TAA COMP 184pin...

512MB DDR 400 UDIMM TAA COMP

Tue, 1 Nov 2011 13:37:03 GMT

512MB DDR 400(PC3200) UDIMM TAA COMP 184pin...

512MB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

512MB PC3200 NONECC UNBUFFERED 184 PIN DDR SDRAM DIMM...

1GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB PC3200 NONECC UNBUFFERED 184 PIN DDR SDRAM DIMM (2 sticks of 512mb Memory)...

1GB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB PC3200 NONECC UNBUFFERED 184 PIN DDR400 SDRAM DIMM...

1GB 400MHz DDR ECC

Tue, 1 Nov 2011 13:37:03 GMT

1GB PC3200 ECC UNBUFFERED 184 PIN DDR400 SDRAM DIMM...

512MB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

512MB PC3200 NONECC UNBUFFERED 184 PIN DDR400 SDRAM DIMM...

1GB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB PC3200 NONECC UNBUFFERED 184 PIN DDR400 SDRAM DIMM...

4GB Kit 400MHz REG

Tue, 1 Nov 2011 13:37:03 GMT

4GB KIT (2X2GB) PC3200 ECC Registered 184-pin DDR KIT DR...

2GB Kit 400MHz ECC DDR

Tue, 1 Nov 2011 13:37:03 GMT

2GB KIT (2X1GB) PC3200 ECC REGISTERED 184 PIN DDR...

512MB 400MHz DDR CL2.5

Tue, 1 Nov 2011 13:37:03 GMT

512MB 400MHz DDR Non-ECC CL2.5 DIMM...Standard 64M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL2.5, Gold). ValueRAM 64M x 64-bit (512MB) DDR400 CL2.5 SDRAM (Synchronous DRAM) memory module. The components on this module include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

256MB 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

256MB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM...Standard 32M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM 32M x 64-bit (256MB) CL3 DDR400 SDRAM (Synchronous DRAM) memory module. The components on this module include eight 32M x 8-bit (8M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

512MB 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

512MB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM...Standard 64M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM 64M x 64-bit (512MB) CL3 DDR400 SDRAM (Synchronous DRAM) memory module. The components on this module include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

512MB 400MHz DDR ECC CL3

Tue, 1 Nov 2011 13:37:03 GMT

512MB 400MHz DDR ECC CL3 (3-3-3) DIMM...Standard 64M X 72 ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM 64M x 72-bit (512MB) CL3 DDR400 SDRAM (Synchronous DRAM) ECC memory module. The components on this module include eighteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

2GB Kit 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

2B 400MHz DDR Non-ECC CL3 (3-3-3) DIMM (Kit of 2)...Standard 128 x 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM KVR400X64C3AK2/2G is a kit of two 128M x 64-bit (1GB) CL3 DDR400 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 2GB (2048MB). The components on each module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V....

1GB 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

1GB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM...Standard 128M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Double-Sided, Gold). ValueRAM 128M x 64-bit (1GB) DDR400 CL3 SDRAM (Synchronous DRAM) memory module. The components on this module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

1GB 400MHz DDR REG ECC CL3

Tue, 1 Nov 2011 13:37:03 GMT

1GB 400MHz DDR ECC Registered CL3 (3-3-3) DIMM Dual Rank, x8...Standard 128M X 72 ECC 400MHz 184-pin Registered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM 128M x 72-bit 1GB (1024MB) DDR400 CL3 SDRAM (Synchronous DRAM) "dual rank" Registered ECC memory module. The components on this module include eighteen 64M x 8-bit (16M x 8-Bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

1GB Kit 400MHz DDR CL3

Tue, 1 Nov 2011 13:37:03 GMT

1GB 400MHz DDR Non-ECC CL3 (3-3-3) DIMM (Kit of 2)...Standard 64M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM KVR400X64C3AK2/1G is a kit of two 64M x 64-bit (512MB) CL3 DDR400 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 1GB (1024MB). The components on each module include sixteen 32M x 8-bit (8M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V....

1GB 400MHz DDR ECC CL3

Tue, 1 Nov 2011 13:37:03 GMT

1GB 400MHz DDR ECC CL3 (3-3-3) DIMM...Standard 128M X 72 ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL3, Gold). ValueRAM 128M x 72-bit 1GB (1024MB) CL3 DDR400 SDRAM (Synchronous DRAM) ECC memory module. The components on this module include eighteen 64M x 8-bit (16M x 8-bit x 4 Bank ) DDR400 SDRAM in TSOP packages. This 184-pin DIMM uses gold contact fingers and requires +2.6V....

2GB Kit 400MHz DDR Non-ECC CL2

Tue, 1 Nov 2011 13:37:03 GMT

2GB 400MHz DDR Non-ECC CL2 (2-3-2-6-1) DIMM (Kit of 2)...Standard 128M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.65V, CL2, Gold). Kingston's KHX3200AK2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR400 SDRAM (Synchronous DRAM) CL2 memory modules, based on sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. Total kit capacity is 2GB (2048MB). Each module pair has been tested to run at low latency timing of 2-3-2-6 at 2.65V. The SPD is programmed to JEDEC standard latency timing of 3-3-3-8 at 2.6V. Each 184-pin DIMM uses gold contact fingers and requires +2.6V....

2GB Kit 400MHz DDR Non-ECC CL2

Tue, 1 Nov 2011 13:37:03 GMT

2GB 400MHz DDR Non-ECC CL2.5 (2.5-3-3-7-1) DIMM (Kit of 2)...Standard 128M X 64 Non-ECC 400MHz 184-pin Unbuffered DIMM (SDRAM-DDR, 2.6V, CL2.5, Gold). Kingston's KHX3200K2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR400 CL2.5 SDRAM (Synchronous DRAM) memory modules. Total kit capacity is 2GB (2048MB). The components on each module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank / 200MHz, 5ns) DDR400 SDRAM in TSOP packages. Each 184-pin DIMM uses gold contact fingers and requires +2.6V....

512MB 400MHz CL2.5 NPDDR SDRAM

Tue, 1 Nov 2011 13:37:03 GMT

Lenovo Memory Upgrade for Desktops - 512MB PC3200 CL2.5 NP DDR SDRAM UDIMM...

2GB 667MHz DDR2 SDRAM

Tue, 1 Nov 2011 13:37:03 GMT

Lenovo Memory Upgrade - 2GB PC2-5300 667MHz DDR2 SDRAM UDIMM Memory...

1GB 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB Module---DDR PC-3200/400MHz/Value Series! 400 MHz, CL 3-4-4-8 (CAS-TRCD-TRP-TRAS), Unbuffered, 2.6 Volts, 184-Pin DIMM, ULN....

1GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

1GB (2x512)---DDR PC-3200/400MHz/Value Series! 400 MHz, CL 3-4-4-8 (CAS-TRCD-TRP-TRAS), Unbuffered, 2.6 Volts, 184-Pin DIMM, ULN....

2GB Kit 400MHz DDR PC-3200

Tue, 1 Nov 2011 13:37:03 GMT

OCZ Platinum XTC Edition DDR 400MHz PC-3200 184-pin Dual Channel Kit; CL 2-3-2-5 Unbuffered; Mirrored platinum finish XTC heatspreader; Lifetime warranty....

2GB Kit 400MHz DDR

Tue, 1 Nov 2011 13:37:03 GMT

2GB KIT 400MHZ DDR PC-3200 CL 3 UNBUFFERED 184 PIN DIMM...