Speaker Selectors

6 Zone Dual Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

Six Zone Dual Source Speaker Selector...

8 Zone Dual Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

Eight Zone Dual Source Speaker Selector...

4 Zone Dual Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

Four Zone Dual Source Speaker Selector with Volume Control...

2 Zone Dual Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

Two Zone Dual Source Speaker Selector with Volume Control...

6 Zone Single Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

6 Zone Single Source Selector...

4 Zone Single Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

4 Zone Single Source Selector...

8 Zone Single Source Selector

Tue, 1 Nov 2011 13:41:30 GMT

8 Zone Single Source Selector, Manual Protection Switch...

4 Zone Speaker Selector w/Volu

Tue, 1 Nov 2011 13:41:30 GMT

PylePro PSPVC4, 4 Channel High Power Stereo Speaker Selector, Up to 4 Separate Speaker Pairs to your Stereo System, Accepts Speaker Wires Up to 14- Gauge, Individual Speaker Volume Control, Support Two Stereo Amplifiers, Frequency Response: 20Hz-20KHz...

6 Zone Speaker Selector w/Volu

Tue, 1 Nov 2011 13:41:30 GMT

PylePro PSPVC6, 6 Channel High Power Stereo Speaker Selector, Up to 6 Separate Speaker Pairs to your Stereo System , Accepts Speaker Wires Up to 14- Gauge, Individual Speaker Volume Control, Support Two Stereo Amplifiers, Frequency Response: 20Hz-20KHz...

8 Channel Speaker Selector

Tue, 1 Nov 2011 13:41:30 GMT

PylePro PSS8, 6 Channel High Power Stereo Speaker Selector, Up To 8 Separate Speakers Pair To Your Stereo System, Accepts Speaker Wires Up To 14-Gauge, Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum Impedance Of 8 Ohms...

Pyle 4-Zone 100-Watt High Power Stereo Speaker Selector - 4-Pair

Tue, 1 Nov 2011 13:41:30 GMT

Accepts up to 14-gauge wire

100-watt power handling per channel (8 ohms)

Frequency response: 20Hz-20kHz

7 " W x 2" H x 4 " D

4-pair...

Pyle 6-Pair 100-Watt High Power Stereo Speaker Selector

Tue, 1 Nov 2011 13:41:30 GMT

Accepts up to 14-gauge wire

100-watt power handling per channel (8 ohms)

Frequency response: 20Hz-20kHz

9" W x 2" H x 6" D...

6 Pair/2 Source Speaker Switch

Tue, 1 Nov 2011 13:41:30 GMT

SDB-6.1 Dual Source 6 Pair Speaker Selector with Zone Volume Controls The SDB-6.1 is a highly efficient dual source, impedance-matching speaker selector. This high quality speaker selector is designed for use with either 4 or 8 ohm speakers and includes a volume control for each pair of speakers on the front panel. This volume control allows you to set and forget the pre-amplifier/receiver volume and use the volume controls on the SDB-6.1 to control the listening level in each room from a central location....

Speaker Block Base Unit

Tue, 1 Nov 2011 13:41:30 GMT

Modular Speaker Connecting Block Base unit. 4 speaker outputs and 1 amplifier input. Color-coded detachable 14 gauge snap connectors...

4 Pair/4 Source Speaker Switch

Tue, 1 Nov 2011 13:41:30 GMT

SDB-4.1 Dual Source 4 Pair Speaker Selector with Zone Volume Controls The SDB-4.1 is a highly efficient dual source, impedance-matching speaker selector. This high quality speaker selector is designed for use with either 4 or 8 ohm speakers and includes a volume control for each pair of speakers on the front panel. This volume control allows you to set and forget the pre-amplifier/receiver volume and use the volume controls on the SDB-4.1 to control the listening level in each room from a central location....

4 Pair Single Source Selectors

Tue, 1 Nov 2011 13:41:30 GMT

Russound announces major upgrades to two of our most popular speaker selectors offering quality audio performance, overload protection and long-term reliability. The SS-6.2 and SS-4.2, which handle up to six and four pairs of loudspeakers respectively, provide impedance matching with automatic overload protection and are compatible for use with high power amplifiers....

Impedance Speaker Selector 2x

Tue, 1 Nov 2011 13:41:30 GMT

2x Setting. Speaker impedance matching device....

Speaker Selector 4 Pairs Spkrs

Tue, 1 Nov 2011 13:41:30 GMT

Speaker Selector for 4 pairs of speakers. Use one amp or receiver to send signals to 4 sets of speakers....

Speaker Selector 6 Pairs Spkrs

Tue, 1 Nov 2011 13:41:30 GMT

Speaker Selector for 6 pairs of speakers. Use one amp or receiver to send signals to 4 sets of speakers....

2 Ch speaker station

Tue, 1 Nov 2011 13:41:30 GMT

The SS-2002 intercom speaker station may be used with a headset, or with the built-in speaker and the panel microphone or an optional gooseneck microphone. As an alternative to a headset, a telephone-style handset may also be used. The SS-2002 provides switch selectable access to either of two intercom channels. The SS-2002 comes in three versions to suit a variety of applications. The "S" box is a portable version. It has a carrying handle and dual "loop-through" intercom connectors, which permit stations to be quickly, interconnected using prefabricated cables. The "P" box is a stationary version. It also has dual "loop-through" connectors for quick interconnection, but the case is designed for desktop or console-mount applications. The "U" box is designed for permanent, in-the-wall mounting. It uses push type wire terminals for connection to the intercom system. In addition to the standard SS-2002 unit, there is a two-channel "RM" version. The rackmountable ("RM") version is suitable for desktop use, or can be rackmounted using the optional RM-14 rackmount kit....